Thompson Peak, at 10,751 feet (3,277 m) above sea level is the highest peak in the Sawtooth Range of Idaho. The summit of Thompson Peak is located within Custer County, although some of the lower portion of the mountain is in Boise County. Thompson Peak is also located within the Sawtooth Wilderness portion of the Sawtooth National Recreation Area, a unit of Sawtooth National Forest. The town of Stanley, Idaho is about 6 miles (9.7 km) northeast of Thompson Peak.
Redfish Lake, Little Redfish Lake, and the visitor services at these locations are only a few miles from Thompson Peak. Directly to the north is neighboring Williams Peak, while Mickey's Spire is 0.24 miles (0.39 km) to the south-southwest.
There are a total of four routes to the top of Thompson Peak: South Couloir - class 3, Southwest Couloir - 5.2, Northeast Face - 5.8, West Crack - 5.2. The easiest way to access Thompson Peak is from the Redfish Lake trailhead and to take the Fishhook Creek Trail to the Alpine Way Trail. From there, follow the Alpine Way Trail to the base of Williams Peak before going off trail up to an unnamed lake to the northeast of Thompson Peak. Then, head up to the saddle between Thompson and Williams Peaks before making the class 3 scramble on the west-southwest side of the peak that begins on the Thompson-Mickey's Spire saddle.
By elevation Thompson Peak is
# 62 out of 3322 in Idaho # 39 out of 193 in Custer County # 1 out of 67 in Sawtooth Wilderness Area # 1 out of 72 in the Sawtooth Range # 67 out of 3056 in the Idaho-Bitterroot Rocky Mountains
By prominence Thompson Peak is
# 50 out of 3322 in Idaho # 10 out of 193 in Custer County # 1 out of 67 in Sawtooth Wilderness Area # 1 out of 72 in the Sawtooth Range # 57 out of 3056 in the Idaho-Bitterroot Rocky Mountains
We use GPS information embedded into the photo when it is available.
3D mountains overlay
Adjust mountain panorama to perfectly match your photos because recorded by camera photo position might be imprecise.
Move tool
Rotate tool
Zoom
More customization
Choose which peak labels should make into the final photo and what photo title should be.
Next
Photo Location
Satellitte
Flat map
Relief map
Latitude
Longitude
Altitude
OR
Latitude
°'''
Longitude
°'''
Apply
Register Peak
Peak Name
Latitude
Longitude
Altitude
Register
Teleport
PeakVisor
This 3D model of Sagarmatha National Park in Nepal was made using the PeakVisor app topographic data. The mobile app features higher precision models worldwide, more topographic details, and works offline. Download PeakVisor maps today.
Download OBJ model
PeakVisor
The download should start shortly. If you find it useful please consider supporting the PeakVisor app.
PeakVisor for iOS and Android
Be a superhero of outdoor navigation with state-of-the-art 3D maps and mountain identification in the palm of your hand!