Windmill Hill is a Neolithic causewayed enclosure in the English county of Wiltshire, part of the Avebury World Heritage Site, about 1 mile (2 km) northwest of Avebury. Enclosing an area of 21 acres (8.5 ha), it is the largest known causewayed enclosure in Britain. The site was first occupied around 3800 BC, although the only evidence is a series of pits apparently dug by an agrarian society using Hembury pottery.
During a later phase, c. 3300 BC, three concentric segmented ditches were placed around the hilltop site, the outermost with a diameter of 365 metres. The causeways interrupting the ditches vary in width from a few centimetres to 7 m. Material from the ditches was piled up to create internal banks, the deepest ditches and largest banks are on the outer circuit.
The site was bought by Alexander Keiller in 1924 and excavated over several seasons from 1926–1929 by Keiller and Harold St George Gray whose work established it as the type site for causewayed camps as they were then called.
Pottery from the bottom of the ditches was also the type style for the Windmill Hill culture. Later occupation layers contained early Peterborough ware than the later Mortlake and Fengate varieties. Large quantities of bone, both human and animal, were also recovered from the ditch fill. The camp remained in use throughout the rest of the Neolithic with Grooved ware and Beaker potsherds having been found in later deposits. A Bronze Age bell barrow was later built between the inner and middle rings.
Michael Dames has proposed a composite theory of seasonal rituals in an attempt to explain Windmill Hill and its associated sites: (West Kennet Long Barrow, the Avebury henge, The Sanctuary, and Silbury Hill).
By elevation Windmill Hill is
# 2 out of 7 in Stonehenge, Avebury and Associated Sites WHS
By prominence Windmill Hill is
# 5 out of 7 in Stonehenge, Avebury and Associated Sites WHS
We use GPS information embedded into the photo when it is available.
3D mountains overlay
Adjust mountain panorama to perfectly match your photos because recorded by camera photo position might be imprecise.
Move tool
Rotate tool
Zoom
More customization
Choose which peak labels should make into the final photo and what photo title should be.
Next
Photo Location
Satellitte
Flat map
Relief map
Latitude
Longitude
Altitude
OR
Latitude
°'''
Longitude
°'''
Apply
Register Peak
Peak Name
Latitude
Longitude
Altitude
Register
Teleport
PeakVisor
This 3D model of Sagarmatha National Park in Nepal was made using the PeakVisor app topographic data. The mobile app features higher precision models worldwide, more topographic details, and works offline. Download PeakVisor maps today.
Download OBJ model
PeakVisor
The download should start shortly. If you find it useful please consider supporting the PeakVisor app.
PeakVisor for iOS and Android
Be a superhero of outdoor navigation with state-of-the-art 3D maps and mountain identification in the palm of your hand!